Scharlau Ethyl acetate, Multisolvent® HPLC grade ACS ISO UV-VIS

CAS number: 141-78-6
Manufacturer product code: AC0155

Scharlau Ethyl acetate, Multisolvent® HPLC grade ACS ISO UV-VIS. Manufacturer reference: AC01551000. Assay (G.C.): min. 99,8 %.

Applications

HPLC laboratory analysis

Packaging options

AC01551000 — 1 L, Glass bottle

Product specifications and documentation are confirmed against the requested reference before quotation.

Product information

Overview

Scharlau Ethyl acetate, Multisolvent® HPLC grade ACS ISO UV-VIS. Manufacturer reference: AC01551000. Assay (G.C.): min. 99,8 %. Listed packaging: AC01551000 — 1 L, Glass bottle. Microfiltered through 0,22 µm membranes. Liquid-chromatography suitability: absorbance test passed. Wavelength table: minimum transmission (%) / maximum absorbance (AU), 1,0 cm cell. Specifications are transcribed from the manufacturer’s technical data sheet. Batch-specific results must be checked against the corresponding certificate of analysis.

CAS number: 141-78-6
Formula: C4H8O2
Molecular weight: 88,10 g/mol
Pack quantity / capacity: 1
Measurement unit: Litre (L)
Package type: Bottle

Packaging and references

1 L · Bottle
AC01551000 — 1 L, Glass bottle

Selected specifications

CAS: 141-78-6
EC number: 205-500-4
Formula: C4H8O2
Molar mass: 88,10 g/mol
assay (G.C.): min. 99,8 %
identity (IR-spectrum): passes test
density (20º/4º): 0,900- 0,902
appearance: clear
colour (Hazen): max. 10
acidity or alkalinity: max. 0,0002 meq/g
aluminium (Al): max. 0,1 ppm
barium (Ba): max 0,01 ppm
boron (B): max. 0,02 ppm
cadmium (Cd): max 0,01 ppm
calcium (Ca): max. 0,3 ppm
chromium (Cr): max. 0,02 ppm
cobalt (Co): max. 0,02 ppm
copper (Cu): max. 0,02 ppm
iron (Fe): max. 0,02 ppm
lead (Pb): max. 0,1 ppm
magnesium (Mg): max. 0,1 ppm
manganese (Mn): max 0,01 ppm
nickel (Ni): max. 0,02 ppm
tin (Sn): max. 0,1 ppm
zinc (Zn): max 0,01 ppm
ethanol (G.C.): max. 0,1 %
methanol (G.C.): max. 0,1 %
methyl acetate (G.C.): max. 0,1 %
substances darkened by H2SO4: passes test
residue on evaporation: max. 0,0002 %
water (K.F.): max. 0,03 %
absorbance: passes test
255 nm: 20 % 0,699 AU
260 nm: 50 % 0,301 AU
263 nm: 80 % 0,097 AU
265 nm: 90 % 0,046 AU
280 nm: 98 % 0,009 AU
Density: 0,90 g/cm3
Solub. in water: (20 ºC): 85,3 g/l
Melting point: -83 ºC
Boiling point: 77 ºC
Flash point: -4 ºC
Ignition temperature: 460 ºC
Vapour pressure: (20 ºC) 97hPa
Refraction index: (n 20 ºC/D) 1,3723
Viscosity: (20 ºC) 0,44 mPas
Dipolar moment: (20 ºC) 1,78 Debye
Dielectric const.: (25 ºC) 6,0
Evap. heat: (77 ºC) 427 KJ/kg
Saturation conc.: (20 ºC) 336 g/m3
Expl. limit (upper): 11,5 Vol%
Expl. limit (lower): 2,1 Vol%
Microfiltered through 0,22 µm membranes.
Liquid-chromatography suitability: absorbance test passed.
Wavelength table: minimum transmission (%) / maximum absorbance (AU), 1,0 cm cell.
Representative manufacturer packaging image; product identity is determined by the manufacturer reference.
Hazard codes (current German SDS, section 2): EUH066, H225, H319, H336
For handling, storage and transport, consult the applicable official SDS.

Applications

HPLC laboratory analysis

BUYER GUIDANCE

Define the requirement before requesting a quotation

Three details help us identify a suitable product and review the request without unnecessary back-and-forth.

Application
Explain where and how the product will be used.
Technical requirement
Share the required grade, dimensions, compatibility, performance or model.
Documentation and delivery
State the required documents, quantity, packaging and destination country.