Scharlau 2-Propanol, Multisolvent® HPLC grade ACS ISO UV -VIS

CAS number: 67-63-0
Manufacturer product code: AL0321

Scharlau 2-Propanol, Multisolvent® HPLC grade ACS ISO UV -VIS. Manufacturer reference: AL03212500. Assay (G.C.): min. 99,8 %.

Applications

HPLC laboratory analysis

Packaging options

AL03212500 — 2.5 L, Glass bottle

Product specifications and documentation are confirmed against the requested reference before quotation.

Product information

Overview

Scharlau 2-Propanol, Multisolvent® HPLC grade ACS ISO UV -VIS. Manufacturer reference: AL03212500. Assay (G.C.): min. 99,8 %. Listed packaging: AL03212500 — 2.5 L, Glass bottle. Hygroscopic. Microfiltered through 0,22 µm membranes. Liquid-chromatography suitability: absorbance test passed. Wavelength table: minimum transmission (%) / maximum absorbance (AU), 1,0 cm cell. Specifications are transcribed from the manufacturer’s technical data sheet. Batch-specific results must be checked against the corresponding certificate of analysis.

CAS number: 67-63-0
Formula: C3H8O
Molecular weight: 60,10 g/mol
Pack quantity / capacity: 2.5
Measurement unit: Litre (L)
Package type: Bottle

Packaging and references

2.5 L · Bottle
AL03212500 — 2.5 L, Glass bottle

Selected specifications

CAS: 67-63-0; EC number: 200-661-7
Formula: C3H8O; Molar mass: 60,10 g/mol
assay (G.C.): min. 99,8 %; identity (IR-spectrum): passes test
density (20º/4º): 0,784 - 0,786; appearance: clear
colour (Hazen): max. 10; solubility in water: passes test
acidity: max. 0,0001 meq/g; alkalinity: max. 0,0001 meq/g
chlorides (Cl): max. 0,00003 %; nitrates (NO3): max. 0,00003 %
phosphates (as PO4): max. 0,00005 %; sulfates (SO4): max. 0,0001 %
aluminium (Al): max. 0,1 ppm; antimony (Sb): max. 0,02 ppm
arsenic (As): max. 0,02 ppm; barium (Ba): max 0,01 ppm
beryllium (Be): max. 0,02 ppm; bismuth (Bi): max. 0,1 ppm
boron (B): max. 0,02 ppm; cadmium (Cd): max 0,01 ppm
calcium (Ca): max. 0,1 ppm; chromium (Cr): max. 0,02 ppm
cobalt (Co): max. 0,02 ppm; copper (Cu): max. 0,02 ppm
gallium (Ga): max. 0,02 ppm; gold (Au): max. 0,02 ppm
indium (In): max. 0,02 ppm; iron (Fe): max. 0,1 ppm
lead (Pb): max. 0,1 ppm; magnesium (Mg): max. 0,02 ppm
manganese (Mn): max. 0,02 ppm; molybdenum (Mo): max. 0,02 ppm
nickel (Ni): max. 0,02 ppm; platinum (Pt): max. 0,02 ppm
silver (Ag): max. 0,02 ppm; thallium (Tl): max. 0,02 ppm
tin (Sn): max. 0,1 ppm; titanium (Ti): max. 0,02 ppm
vanadium (V): max. 0,02 ppm; zinc (Zn): max 0,01 ppm
zirconium (Zr): max. 0,02 ppm; acetone (G.C.): max. 0,01 %
ethanol (G.C.): max. 0,01 %; isopropylether (G.C.): max. 0,01 %
methanol (G.C.): max. 0,01 %; n-propanol (G.C.): max. 0,1 %
carbonyl compounds (as CO): max. 0,002 %; substances reducing KMnO4: passes test
substances darkened by H2SO4: passes test; residue on evaporation: max. 0,0002 %
water (K.F.): max. 0,05 %; absorbance: passes test
207 nm: 10 % 1,000 AU; 217 nm: 50 % 0,301 AU
232 nm: 80 % 0,097 AU; 242 nm: 90 % 0,046 AU
260 nm: 98 % 0,009 AU; Density: 0,785 g/cm3
Solub. in water: (20 ºC): miscible; Melting point: -89,5 ºC
Boiling point: 82,4 ºC; Flash point: 12 ºC
Ignition temperature: 425 ºC; Vapour pressure: (20 ºC) 43 hPa
Viscosity: (20 ºC) 2,27 mPas; Dipolar moment: (20 ºC) 1,66 Debye
Dielectric const.: (25 ºC) 18,3; Saturation conc.: (20 ºC) 105 g/m3
Expl. limit (upper): 12,7 Vol%; Expl. limit (lower): 2 Vol%
pH(20 ºC): ~ 7 HPLC grade ACS ISO UV -VIS; Hygroscopic.
Microfiltered through 0,22 µm membranes.; Liquid-chromatography suitability: absorbance test passed.
Wavelength table: minimum transmission (%) / maximum absorbance (AU), 1,0 cm cell.; Representative manufacturer packaging image; product identity is determined by the manufacturer reference.
Hazard codes (current German SDS, section 2): H225, H319, H336; For handling, storage and transport, consult the applicable official SDS.

Applications

HPLC laboratory analysis

BUYER GUIDANCE

Define the requirement before requesting a quotation

Three details help us identify a suitable product and review the request without unnecessary back-and-forth.

Application
Explain where and how the product will be used.
Technical requirement
Share the required grade, dimensions, compatibility, performance or model.
Documentation and delivery
State the required documents, quantity, packaging and destination country.